ATLAS PLASTERING MIX forms a two-layer plaster cat 0-III – the plaster consists of two layers: “preliminary coat” and “top coat” (additionally, a filler layer of ATLAS REKORD cementitious filling mortar can be made on it).
It is suitable for manual plastering.
Types of substrate to be rendered – ceilings and walls of brick, block, hollow block and other such ceramic or silicate materials; surfaces of concrete, aerated concrete, chipboard, cement and cement-lime plaster.
Properties
High strength:
-
- category CS II (1.5 ÷ 5.0 N/mm²).
So called anti-freezing agents may be added to the mortar allowing for works at lower temperatures, i.e. below +5°C –
-
- the new temperature range of mortar application, mortar prepara-tion method (in particular adjustment of the amount of water added), working principles and mortar setting conditions should be adopted according to the additive manufacturers indications. The amount of anti-freeze additive depends on the cement content in the mortar – the cement/filler ratio in ATLAS PLASTERING MIX is 1:4 Note. The mortar manufacturer is not responsible for the effects and quality of the anti-freeze additives used.
- ATLAS PLASTERING MIX is produced as a dry mixture of the highest quality cement binder, quartz fillers and refining additives.
Reviews
There are no reviews yet.