Purpose:
– making putty,
– filling small gaps up to 3 mm,
– full-surface filling of plasterboards,
– filling levels of plasterboards Q2-Q4.

Properties
Convenient application with a roller – specially selected consistency is ideally designed for application with a roller; the putty can also be easily applied with a trowel or unit.
Easy wet-on-wet application – the next layer can be applied to the pre-bonded previous layer, which significantly shortens the time of work.
Optimal processing time – the putty is designed to guarantee the comfort of the contractor’s work; smoothing of the mass applied to the surface can be done without haste, and the joints of the working fields will remain invisible.
Smooth surface – specially selected mineral fillers with optimal grain size will allow you to obtain a very smooth surface, without corrections – the first smoothing of the applied layer with a pen gives an excellent final effect.
Limited dusting – optimal hardness allows for manual and mechanical sanding; dust appearing during sanding does not float around the entire room and does not spread outside the place of processing.
Easy painting with any type of paint – satin surface and high resistance to softening means that the smoothing compound works well with paint coatings, it can be painted with acrylic, latex and ceramic paints.
The change in the color of the smoothing compound during sanding and drying allows you to control the progress of the work.

Consumption
On average, approx. 1.5 kg of mass is used per 1 m2 per layer, depending on the applied thickness and quality of the substrate.